The MULTCLOR pH AND ALKALINITY REDUCER is especially recommended to reduce the pH of the pool water. The pH (potential of hydrogen) is a measure that finds out if the swimming pool water is acid (low pH), neutral (pH 7.0) or alkaline (high pH). In swimming pools, the pH ought to be kept between 7.4 and 7.6.
The correct use of the MULTCLOR pH AND ALKALINITY REDUCER helps to maintain the pH within the appropriated rate that guarantees comfort to the swimmers, effective acting of the chemical products in the disinfection process and safety of metallic equipments.
INSTRUCTIONS OF USE
• Use the Multclor 3 in 1 Test Strip and analyze the alkalinity and the pH.
• O pH ought to be analyzed daily being settled with the MULTCLOR pH ELEVATOR or with MULTCLOR pH AND ALKALINITY REDUCER.
• In the case of the pH is below, the appropriated rate ought to be adjusted, observing always the total of alkalinity found initially, according to the table below:
In case of the Alkalinity is above the ideal rate, adjust it, according to the table below:
• Dissolve previously the product in plastic recipient with water of the own swimming pool and apply evenly on the whole surface of the swimming pool. The use of the swimming pool will be allowed 30 minutes after the application of the product.
• Use the Multclor 3 in 1 Test Strip for daily analysis of active chlorine content that ought to be within the recommended rate from 1 up to 3 ppm.
• Filter the water daily for at least 6 hours or seek advice from the manufacturer of your equipment.
• Vacuum the bottom and brush the walls of the swimming pool no less than once a week.
• Apply weekly the powerful MULTCLOR SOS O² SHOCK in order to maintain the swimming pool water pure and crystalline in a convenient and simple way.
