The MULTCLOR GRANULATED ALGAECIDE is a powerful algae remover for swimming pools concentrated of organic chlorine stabilized oxygenated base. It uses an exclusive technology of O² Shock Power of the oxygen, acting as much in the removal as in the prevention of algae appearance. It can be used as shock algaecide or in the maintenance, depending on the need and quantity required. Safe in all sorts of swimming pool: Fiberglass, Vinyl, Concrete or Painting.

• Use the Multclor 3 in 1 Test Strip and analyze the alkalinity and the pH.
• The alkalinity total ought to be between 100 and 120 ppm.
• Keep the pH within the appropriated rate 7.4 to 7.6.
• Dissolve previously the product in a plastic recipient with the own swimming pool water spreading evenly on the whole surface with the filtration or recirculation working for the homogenization of the product. The use of the swimming pool will be allowed 30 minutes after the application of the product.
• If necessary, repeat the process, always following the recommended quantity.
• Filter the water daily for at least 6 hours or seek advice from the manufacturer of your equipment.
• Vacuum the bottom and brush the walls of the swimming pool no less than once a week.